These specifications are subject to change. Due to the modular nature of TORQ Builds, specifics may vary by configuration.
Component Weights
| Component | kg | lb |
|---|
| “Nexus” Pan Motor | 2.00 | 4.40 |
| “Vector” Tilt Motor (Single) | 1.16 | 2.55 |
| “Saturn” Roll Motor | 2.35 | 5.17 |
| Yoke (Pair) | 0.58 | 1.28 |
| TB-50 Plate (Single) | 0.26 | 0.57 |
| Quick Release Plate | 0.38 | 0.84 |
| Mitchell Mount | 0.95 | 2.09 |
| Two-Axis Steadicam Plate | 0.12 | 0.26 |
| One-Axis Steadicam Plate | 0.28 | 0.62 |
Assembly Weights
| Build Configuration | kg | lb |
|---|
| 3-Axis – NVVS | 8.00 | 17.60 |
| NVVS + TB-50 Plates + QRP + Mitchell | 9.85 | 21.67 |
| 2-Axis – VVS | 6.12 | 13.46 |
| 1-Axis – S Solo | 2.63 | 5.79 |
Power & Connectivity
| Max Input Voltage | 50 Volts |
| Min Input Voltage | 10 Volts |
| Ideal Operating Range | 15–32 Volts |
| Connector Type | AXIO |
| Max Current (AXIO) | 18 Amps |
| Protection | Reverse Polarity, Overcurrent, Undervoltage |
| Data Type | RS-485 |
Max Payload by Application
| Application | Max Payload (lb) | Max G-Forces |
|---|
| Jib | 60 | 1.25 |
| Techno / Readyrig | 50 | 1.5 |
| Pursuit Vehicle w/ Isolator | 30 | 3.0 |
AUXIO Port
| Connector Type | Molex 14-Pin Nano |
| Regulated Output | 5 Volts @ 1 Amp |
| Unregulated Output | AXIO Voltage @ 2 Amps |
| Data Protocols | UART TTL, RS-485 Full/Half |
Stabilization
| IMU Type | Gyro, Accelerometer, Compass Fusion |
| IMU Location | In every motor |
| Drift | 2–9° / Hour |
| Available Algorithms | 1-Axis, 2-Axis, 3-Axis |
